v1.01.126 ZZZZ126 - Order validation CREA_CHAMP OPERATION: “ASSE”

Summary:

This test validates the operation “ASSE” of the CREA_CHAMP command, which allows you to manufacture a field (with nodes or elements) by « assembling » bits of existing fields.

The test consists in assigning quantities (displacements, constraints or internal variables) to geometric entities (meshes and nodes). The fields obtained by assignment are then combined with the operation “ASSE” of the CREA_CHAMP command and the fields obtained by assignment are then combined and verified that the result field contains the correct values.

• 1. Reference problem
  • 1.1. Geometry
  • 1.2. Material properties
  • 1.3. Boundary conditions and loads
  • 1.4. Initial conditions
• 2. Benchmark solution
  • 2.1. Calculation method used for the reference solution
  • 2.2. Benchmark results
  • 2.3. Uncertainties about the solution
• 3. Modeling A
  • 3.1. Characteristics of modeling
  • 3.2. Characteristics of the mesh
  • 3.3. Tested values
• 4. Summary of results