v1.01.121 ZZZZ121 - Adapting mesh with HOMARD

Summary

This series of test cases validates the mesh adaptation with HOMARD by computer. On a simple mesh, either in 2D or in 3D, a static mechanical or thermal calculation is launched, with production of an error indicator. From there, a call to the HOMARD software will lead to a modification of the mesh. On this new mesh, a new calculation is activated, corresponding to the same physical problem.

These test cases are not examples of the benefits of mesh adaptation and have no physical meaning. They only serve as non-regression tests of functionality in the various possible configurations.

• 1. Generalities
  • 1.1. background
  • 1.2. Material
  • 1.3. Calculation method used for the reference solution
  • 1.4. Bibliographical references
• 2. Modeling A
  • 2.1. Geometry
  • 2.2. Boundary conditions and changes
  • 2.3. Characteristics of the mesh
  • 2.4. Benchmark results
  • 2.5. notes
• 3. C modeling
  • 3.1. Geometry
  • 3.2. Boundary conditions and loading
  • 3.3. Initial conditions
  • 3.4. Benchmark results
  • 3.5. notes
• 4. D modeling
  • 4.1. Geometry
  • 4.2. Boundary conditions and loading
  • 4.3. Characteristics of the mesh
  • 4.4. Benchmark results
• 5. E modeling
  • 5.1. Geometry
  • 5.2. Boundary conditions and loading
  • 5.3. Characteristics of the mesh
  • 5.4. Benchmark results
• 6. F modeling
  • 6.1. Geometry
  • 6.2. Boundary conditions and loading
  • 6.3. Characteristics of the mesh
  • 6.4. Benchmark results
• 7. Summary of results