v1.01.115 ZZZZ115 - Order validation CALC_COUPURE

Summary:

This test case is used to validate command CALC_COUPURE.

For more information see document U4.81.24

Table of Contents

• 1. Reference problem
  • 1.1. Geometry and meshing
  • 1.2. Cuts made
  • 1.3. Material properties
  • 1.4. Modelizations
  • 1.5. Boundary conditions and loads
  • 1.6. Reference quantities and results
• 2. Modeling A
  • 2.1. Finite element type
  • 2.2. Boundary conditions and loading
  • 2.3. Reference quantities and results
• 3. B modeling
  • 3.1. Finite element type
  • 3.2. Boundary conditions and loading
  • 3.3. Reference quantities and results
• 4. C modeling
  • 4.1. Finite element type
  • 4.2. Boundary conditions and loading
  • 4.3. Reference quantities and results
• 5. References