5. Examples

We can refer to test SZLZ105 for damage and the accumulation of damage, to tests SSLV135a for periodic loads and to tests SSLV135c for cases where the load is non-periodic.

For the use of TYPE_CALCUL = “FATIGUE_VIBR”, you can refer to the sdlv129a test case.

5.1. Calculation of the half-amplitude of maximum shear by the method: “CERCLE_EXACT”

See test case SSLV135a. Here the loading is periodic and the damage is calculated at Gauss points.

5.2. Calculation of damage when loading is not periodic

See test case SSLV135b. Here the loading is not periodic, the damage is calculated at the nodes on a part of the whole mesh: the “FACE1”, “FACE3” and “FACE5” points.

5.3. Calculation of damage with criterion FATESOCI_MODI_AV

See test case SSLV135b. Here the loading is not periodic, the damage is calculated at the nodes on a part of the whole mesh: the “FACE1”, “FACE2” and “FACE3” nodes.

5.4. Calculation of damage with the criteria in formula

criterion of “MAKATE_MODI_AC”: See test case SSLV135a.

criterion of “DANG_VAN_MODI_AC”: See test case SSLV135a.

criterion of “MATAKE_MODI_AV”: See test case SSLV135b.

criterion of “DANG_VAN_MODI_AV”: See test case SSLV135b.

criterion of “FATESOCI_MODI_AV”.: See test case SSLV135b.