Examples
========

We can refer to test SZLZ105 for damage and the accumulation of damage, to tests SSLV135a for periodic loads and to tests SSLV135c for cases where the load is non-periodic.

For the use of TYPE_CALCUL = 'FATIGUE_VIBR', you can refer to the sdlv129a test case.




Calculation of the half-amplitude of maximum shear by the method: 'CERCLE_EXACT'
------------------------------------------------------------------------

See test case SSLV135a. Here the loading is periodic and the damage is calculated at Gauss points.




Calculation of damage when loading is not periodic
----------------------------------------------------------

See test case SSLV135b. Here the loading is not periodic, the damage is calculated at the nodes on a part of the whole mesh: the 'FACE1', 'FACE3' and 'FACE5' points.




Calculation of damage with criterion FATESOCI_MODI_AV
--------------------------------------------------

See test case SSLV135b. Here the loading is not periodic, the damage is calculated at the nodes on a part of the whole mesh: the 'FACE1', 'FACE2' and 'FACE3' nodes.




Calculation of damage with the criteria in formula
----------------------------------------------

criterion of 'MAKATE_MODI_AC': See test case SSLV135a.

criterion of 'DANG_VAN_MODI_AC': See test case SSLV135a.

criterion of 'MATAKE_MODI_AV': See test case SSLV135b.

criterion of 'DANG_VAN_MODI_AV': See test case SSLV135b.

criterion of 'FATESOCI_MODI_AV'.: See test case SSLV135b.