r5.05.09 Calculation of reconstituted signals and the transfer function matrix

Summary

This document presents the theoretical bases that made it possible to set up the macro command CALC_TRANSFERT [U4.53.51].

The latter makes it possible to calculate the transfer function matrix between two points, but also to reconstitute the signals at a given point, knowing the signals at another point.

Table of Contents

• 1. Introduction
• 2. Theory
  • 2.1. General principle
  • 2.2. Determination of the transfer function matrix \(\underline{\underline{H}}(\omega )\)
  • 2.3. Determining the signal to be reconstructed
• 3. Macro command resolution summary
• 4. Description of document versions