Modeling A
==============


Characteristics of modeling
-----------------------------------

We use DKT modeling for the tank shell and 3D elements for the fluid.


Tested sizes and results
------------------------------

The frequency of the first wet mode is tested.


.. csv-table::

    "Identification", "Reference Type", "Reference Value", "Tolerance"
    "Mode 1", "'SOURCE_EXTERNE'", "4.29 Hz", "3%"


We also test the response when moving at the top of the reservoir to the earthquake in the horizontal direction.


.. csv-table::

    "Identification", "Reference Type", "Reference Value", "Tolerance"
    "Top of cylinder :math:`\mathrm{DX}` ", "'SOURCE_EXTERNE'", "2.47 mm", "14%"