Model Ione
=============


Characteristics of modeling
-----------------------------------

Same case as the previous modeling but in D_ PLAN_HS (really saturated modeling, gas flows no longer exist). The mesh consists of triangles.

Moreover, instead of applying a pressure gradient, the expected flow is applied directly at the outlet (the aim is to test the water flow limit condition for modeling D_ PLAN_HS.).

The expected results are the same.


Characteristics of the mesh
----------------------------

Number of knots: 625

Number of meshes and types: 344 meshes, 60 SEG3et 284 TRIA6


Tested sizes and results
------------------------------


.. csv-table::

    "**Identification**", "**Reference Type**", "**Value**", "**Tolerance (** :math:`\text{\%}` **)**"
    "Component :math:`\mathrm{INTE}\text{\_}\mathrm{FH11}`,
    location :math:`\mathrm{MDROITE}` ", "'AUTRE_ASTER'", "-2.0E-10"," 0.1%"
    "Component :math:`\mathrm{INTE}\text{\_}\mathrm{FH11}`,
    location :math:`\mathrm{MMIL}` ", "'AUTRE_ASTER'", "2.0E-10"," 0.1%"
    "Component :math:`\mathrm{INTE}\text{\_}\mathrm{FH11}`,
    location :math:`\mathrm{MGAUCHE}` ", "'AUTRE_ASTER'", "2.0E-10"," 0.1%"