B modeling
==============


Characteristics of B modeling
-------------------------------------

D_ PLAN_HH2S modeling. This modeling corresponds to Finis Element modeling. Coupling LIQU_AD_GAZ. A mesh consisting of 50 QUAD8 elements is used.


Results
---------

The results are very similar to those obtained with modeling finite volumes decentralized on the edge (modeling A).


Tested values
---------------

This test case has no reference value, so we make it a non-regression case.


+-----------------------------------------------+--------------------+------------------+------------------+
|**Points** :math:`(x,y)`                       |**Time** :math:`(s)`|**PRE1** **Aster**|**PRE2** **Aster**|
+-----------------------------------------------+--------------------+------------------+------------------+
|:math:`(0;\mathrm{0,049})` :math:`\mathit{N51}`|200s                |-124.6            |                  |
+                                               +--------------------+------------------+------------------+
|                                               |1800s               |-9.475            |                  |
+                                               +--------------------+------------------+------------------+
|                                               |86400 s             |600.1             |1.00E+05          |
+-----------------------------------------------+--------------------+------------------+------------------+
|:math:`(0;1)` :math:`\mathit{N2}`              |200s                |                  |1.00E+05          |
+                                               +--------------------+------------------+------------------+
|                                               |1800s               |                  |1.00E+05          |
+                                               +--------------------+------------------+------------------+
|                                               |86400 s             |                  |1.00E+05          |
+-----------------------------------------------+--------------------+------------------+------------------+

                     Table 3.3-1: Tested values