D modeling
==============


Characteristics of modeling D
-------------------------------------

D_ PLAN_HH2S modeling. This modeling corresponds to the Elements Finis modeling. The hydraulic coupling law is LIQU_AD_GAZ_VAPE. The mesh consists of 200 TRIA6 elements.


Results
---------

The results are identical to those obtained with finite volume modeling off-centered on the edge (modeling A).


Tested values
---------------

Tests are carried out on 2 nodes at :math:`t\mathrm{=}100s` by comparing the results to the analytical solution. We also test the first node in non-regression with an authorized relative error of :math:`\mathrm{0,01}\text{\%}`.


.. csv-table::

    "**Points** :math:`(x,y)` ", "**Time** :math:`(s)` ", "**PRE1** **Aster**", "**Relative error allowed (** :math:`\text{\%}` **)**"
    ":math:`(\mathrm{0,05};\mathrm{0,})`
    :math:`\mathit{N203}` ", "100 s", "-8.93E+002", "3%"
    ":math:`(\mathrm{0,05};\mathrm{0,005})`
    :math:`\mathrm{N103}` ", "100 s", "-8.93E+002", "3%"


**Table** 5.3-1 **: Values tested**