C modeling
==============


Characteristics of C modeling
-------------------------------------

D_ PLAN_HH2SUDA modeling. This modeling corresponds to the modeling Finite Volumes decentralized on the edges for mobilities (Fickian terms are centered). The law of hydraulic coupling is LIQU_AD_GAZ_VAPE. The mesh consists of 200 TRIA7 elements.


Results
---------

The results are identical to those obtained with modeling finite volumes decentralized on the edge (modeling A).


Tested values
---------------

We are doing tests on 3 nodes at :math:`t\mathrm{=}100s`.

On two nodes we compared the results to the analytical solution and on the third node we performed a non-regression test.


.. csv-table::

    "**Points** :math:`(x,y)` ", "**Time** :math:`(s)` ", "**PRE1** **Aster**", "**Relative error allowed (** :math:`\text{\%}` **)**"
    ":math:`(\mathrm{0,075};0)`
    :math:`\mathit{N360}` ", "100 s", "-1,33E+003"," 3%"
    ":math:`(\mathrm{0,075};\mathrm{0,025})`
    :math:`\mathit{N505}` ", "100 s", "-1,33E+003"," 3%"
    ":math:`(1675;\mathrm{0,0158})`
    :math:`\mathit{NT70}` ", "100 s", "-3,13E+002"," 0.01%"


Table 4.3-1: Tested values