6. E modeling#
6.1. Characteristics of modeling E#
3D Modeling_ HH2MS. This modeling corresponds to finite element modeling and is just intended to test 3D modeling_ HHMS with imposed flow. Travel is blocked on the edges of the estate. Coupling LIQU_AD_GAZ. We use a mesh composed of 100 HEXA20 elements.
6.2. Results#
The results are identical to those obtained with finite volume modeling (Modeling A).
6.3. Tested values#
This test case has no reference value, so we make it a non-regression case.
Tests are carried out on 6 values:
Points \((x,y)\) |
Time ( \(s\) ) |
PRE1 |
PRE2 |
\((\mathrm{-}\mathrm{49 };\mathrm{-}\mathrm{0,5 };\mathrm{0,5})\) \(\mathrm{N6}\) |
1 year |
-9.99E+005 |
2,168E+003 |
1000 years |
-7,45E+005 |
2.55E+005 |
|
\((\mathrm{-}\mathrm{47 };\mathrm{-}\mathrm{0,5 };\mathrm{0,5})\) \(\mathrm{N16}\) |
1 year |
-1.00E+006 |
2,322E-001 |
1000 years |
-7,91E+006 |
2.10E+005 |
|
\((\mathrm{-}\mathrm{48 };\mathrm{-}\mathrm{0,5 };\mathrm{-}\mathrm{0,5})\) \(\mathrm{N716}\) |
1 year |
-1.00E+006 |
7,86 |
1000 years |
-7,69E+005 |
2.32E+005 |