v7.32.114 WTNP114 - Reference test case for calculating mechanical deformations

Summary:

The objective of this test is to validate the post-treatment of mechanical deformations in THM: EPSI_ELGA and EPSI_ELNO.

This two-dimensional problem is treated with modeling \(\mathrm{2D}\).

In particular, the functionalities treated are:

• distributed pressure,

• deformations and stresses at the nodes,

The reference solution is an analytical solution.

• 1. Reference problem
  • 1.1. Geometry
  • 1.2. Material properties
  • 1.3. Boundary conditions and loads
• 2. Benchmark solution
  • 2.1. Calculation method used for the reference solution
  • 2.2. Benchmark results
  • 2.3. Uncertainty about the solution
  • 2.4. Bibliographical references
• 3. Modeling A
  • 3.1. Characteristics of modeling
  • 3.2. Characteristics of the mesh
  • 3.3. Tested sizes and results
• 4. Summary of results