Modeling A
==============


Characteristics of modeling A
-------------------------------------

The results presented here result from the modeling in plane deformations D_ PLAN_THHD carried out with 2988 elements TRI3.


Results
---------

Capillary pressure and saturation profiles are presented on a horizontal (:math:`y\mathrm{=}\mathrm{450m}`) and vertical (:math:`x\mathrm{=}\mathrm{7m}`) section.


.. image:: images/10000201000001DD0000012211D9CE8AF3CC09D7.png
    :width: 4.9902in
    :height: 3.0209in


.. _RefImage_10000201000001DD0000012211D9CE8AF3CC09D7.png:

**Figure 3.3-a: Capillary Pressure Profiles** :math:`Y\mathrm{=}\mathrm{-}\mathrm{450m}`


.. image:: images/100002010000026E00000162D9E5E1B0B208FF48.png
    :width: 5.3945in
    :height: 3.061in


.. _RefImage_100002010000026E00000162D9E5E1B0B208FF48.png:

**Figure 3.3-b: Saturation Profiles** :math:`Y\mathrm{=}\mathrm{-}\mathrm{450m}`


.. image:: images/10000201000001DD0000012211D9CE8AF3CC09D7.png
    :width: 4.9902in
    :height: 3.0209in


.. _RefImage_10000201000001DD0000012211D9CE8AF3CC09D7.png0:

**Figure 3.3-c: Capillary Pressure Profiles** :math:`X\mathrm{=}7m`


.. image:: images/100002010000027D00000122A9651FA93C14A2C5.png
    :width: 5.5252in
    :height: 2.5071in


.. _RefImage_100002010000027D00000122A9651FA93C14A2C5.png:

**Figure 3.3-d: Saturation Profiles** :math:`X\mathrm{=}7m`


Tested sizes and results
------------------------------


.. csv-table::

    ":math:`X` **(** :math:`m` **)**", ":math:`Y` **(** :math:`m` **)**", "**Time (years)**", ":math:`\mathrm{PRE1}` **(** :math:`\mathrm{Pa}` **)**) External Source**", "**Tolerance (**:math:`\text{\%}`**) **"
    "5", "-450", "27", "27", "2.9E7", "20"
    "5", "-450", "10000", "10000", "4.35E6", "20"
    "7", "-450", "27", "3.6E6", "20"
    "7", "-450", "10000", "10000", "4.34E6", "20"


The results are qualitatively consistent with those found in the Alliances literature: we only have isovalues as a reference, so the error tolerance is quite high (:math:`\text{20\%}`).