Modeling A ============== Characteristics of modeling A ------------------------------------- * Modeling in 2D plane deformations. * Hydraulic law: 'LIQU_AD_GAZ_VAPE' * 50 :math:`Q8` items. The simulation is carried out over one year. Result of modeling A ----------------------------- The following figures show the profiles of variation in temperature, capillary pressure, pressure, saturation and gas pressure variation (with respect to the initial state) at various times (1 hour, 1 month, 1 year). The observed behavior corresponds well to that of drying with a progressive desaturation front. The kinetics are logically different for thermal and for drying. This is a case of non-regression (no reference solution). .. image:: images/100000000000034A000002534F0D2564E51CE616.png :width: 3.9016in :height: 2.7563in .. _RefImage_100000000000034A000002534F0D2564E51CE616.png: Figure 3.2-1: Temperature profiles .. image:: images/100000000000034A0000025359978166DBC09ADD.png :width: 3.9016in :height: 2.7563in .. _RefImage_100000000000034A0000025359978166DBC09ADD.png: Figure 3.2-2: Capillary Pressure Profiles .. image:: images/100000000000034A00000253211121106AE00932.png :width: 3.9016in :height: 2.7563in .. _RefImage_100000000000034A00000253211121106AE00932.png: Figure 3.2-3: Saturation profiles .. image:: images/100000000000034A00000253F119C5B7AFAD086C.png :width: 3.9016in :height: 2.7563in .. _RefImage_100000000000034A00000253F119C5B7AFAD086C.png: Figure 1: Gas pressure profiles The pressure and saturation values are checked at node 14 (x=0.04; y=0). .. csv-table:: "**Time**", "**S**", "PRE1 **(MPa)**" "1 hour", "0.984", "1, 35" "1 month", "0.965", "1, 57" "1 year", "0, 862", "4, 11" It is then verified on a 1-hour model that the isotherm is well taken into account in order to: * the law of behavior 'LIQU_AD_GAZ'. .. csv-table:: "**Time**", "PRE1 **(MP** a)" "1 hour", "1, 29" * the law of behavior 'LIQU_GAZ'. .. csv-table:: "**Time**", "PRE1 **(MP** a)" "1 hour", "1, 29" * the law of behavior 'LIQU_VAPE_GAZ'. .. csv-table:: "**Time**", "PRE1 **(MP** a)" "1 hour", "1, 33"