v7.31.147 WTNV147 - Hydromechanical coupling in a poro-elastic and fractured column: use of the XFEM method

Summary:

The aim of this test is to ensure the correct functioning of the hydrodynamic coupling between the cohesive interface and the porous matrix for hydromechanical elements coupled with XFEM. This test is therefore purely hydrodynamic, all the degrees of freedom of movement are locked at zero. Modeling A is two-dimensional while modeling B is three-dimensional.

• 1. Reference problem
  • 1.1. Geometry of the problem
  • 1.2. Material properties
  • 1.3. Boundary conditions
• 2. Benchmark solution
  • 2.1. Calculation method
  • 2.2. Reference quantities and results
  • 2.3. Uncertainties about the solution
  • 2.4. Bibliographical references
• 3. Modeling A
  • 3.1. Characteristics of modeling
  • 3.2. Characteristics of the mesh
  • 3.3. Tested sizes and results
• 4. B modeling
  • 4.1. Characteristics of modeling
  • 4.2. Characteristics of the mesh
  • 4.3. Tested sizes and results
• 5. Summary of results