C modeling
==============


Characteristics of C modeling
-------------------------------------

Same as modeling A but in selective modeling: 3D_ HH2M_SI.


Tested sizes and results
------------------------------

We recall that the temperature from the thermal calculation corresponds to the dry air pressure from our thermo-hydro-mechanical calculation. Since the vapour pressure is constant, we have:


.. image:: images/Object_87.svg
    :width: 242
    :height: 26


.. _RefImage_Object_87.svg:


.. csv-table::

    ":math:`X(m)` ", "**Time** :math:`(s)` "," :math:`\mathit{PRE2}` ", "**Tolerance (** :math:`\text{\%}` **)**"
    "0.2", "3E9", "1.120E4"," 1%"
    "0.2", "5E9", "1.223E3"," 1%"
    "0.5", "3E9", "6570"," 1%"
    "0.5", "5E9", "8685"," 1%"


In addition, two non-regression tests are carried out on the Von Mises constraint (VMIS) and Tresca constraint (TRESCA).