E modeling
==============

Characteristics of modeling
------------------------

Modeling DKT. Unit thickness (to find the same reference solutions as the C_ PLAN case). The behavior is linear kinematic work hardening is modeled by behavior VMIS_CINE_GC, taking:

D_ SIGM_EPSI = :math:`\mathrm{E.C}(T)/(E+C(T))` with :math:`C(T)=(1000+\mathrm{2990.T})`

SIGM_LIM = 200, EPSI_LIM =2.0E-03

Temporal discretization: 1 time step between :math:`t=\mathrm{0s}` and :math:`t=\mathrm{1s}` and 40 time steps between :math:`t=\mathrm{1s}` and :math:`t=\mathrm{2s}`.


Characteristics of the mesh
----------------------------

The mesh consists of one QUAD4 mesh and two TRIA3 mesh


Tested sizes and results
------------------------------

.. csv-table::

    "**Behavior**", "**Instant**", "**Movement and effort**", "**Reference**", "**Aster**"
    "VMIS_CINE_GC ", "1.0"," NYY ", "210.0", "210.0"
    "", "1.0", "DY", "1.105E-02", "1.105E-02", "1.105E-02"
    "", "1.1", "DY", "1.115E-02", "1.115E-02"
    "", "2.0", "DY", "2.850E-03", "2.850E-03", "2.850E-03"