3. Modeling A#
3.1. Characteristics of modeling#
The law of behavior used is META_V_CL (cf [U4.51.11] and [R4.04.02]).
A temperature \(T=700°C\) is uniformly imposed on the structure and TRC is such that the metallurgical state corresponding to this temperature is \(\text{100\%}\) ferritic.
3.2. Characteristics of the mesh#
Number of knots: |
8 |
Number of meshes and types: |
1 HEXA8 |
3.3. Tested sizes and results#
Identification |
Reference |
Reference type |
Tolerance (%) |
Deformation \(\mathit{EPXX}\) at node \(\mathit{NO2}\) to \(t=10.0s\) |
|
“AUTRE_ASTER” |
\(0.1\) |
Thermal deformation \(\mathit{EPXX}\) at node \(\mathit{NO2}\) to \(t=10.0s\) |
|
“AUTRE_ASTER” |
\(0.1\) |
Mechanical deformation \(\mathit{EPXX}\) at node \(\mathit{NO2}\) to \(t=10.0s\) |
|
“AUTRE_ASTER” |
\(0.1\) |
Plastic deformation \(\mathit{EPXX}\) at node \(\mathit{NO2}\) to \(t=10.0s\) |
|
“AUTRE_ASTER” |
\(0.1\) |
Deformation \(\mathit{EPXY}\) at node \(\mathit{NO2}\) to \(t=10.0s\) |
|
“AUTRE_ASTER” |
\(0.1\) |
Mechanical deformation \(\mathit{EPXY}\) at node \(\mathit{NO2}\) to \(t=10.0s\) |
|
“AUTRE_ASTER” |
\(0.1\) |
Plastic deformation \(\mathit{EPXY}\) at node \(\mathit{NO2}\) to \(t=10.0s\) |
|
“AUTRE_ASTER” |
\(0.1\) |
Deformation \(\mathit{EPXX}\) at node \(\mathit{NO2}\) to \(t=60.0s\) |
|
“AUTRE_ASTER” |
\(0.1\) |
Mechanical deformation \(\mathit{EPXX}\) at node \(\mathit{NO2}\) to \(t=60.0s\) |
|
“AUTRE_ASTER” |
\(0.1\) |
Plastic deformation \(\mathit{EPXX}\) at node \(\mathit{NO2}\) to \(t=60.0s\) |
|
“AUTRE_ASTER” |
\(0.1\) |
Deformation \(\mathit{EPXY}\) at node \(\mathit{NO2}\) to \(t=60.0s\) |
|
“AUTRE_ASTER” |
\(0.1\) |
Mechanical deformation \(\mathit{EPXY}\) at node \(\mathit{NO2}\) to \(t=60.0s\) |
|
“AUTRE_ASTER” |
\(0.1\) |
Plastic deformation \(\mathit{EPXY}\) at node \(\mathit{NO2}\) to \(t=60.0s\) |
|
“AUTRE_ASTER” |
\(0.1\) |