.. _V7.15.100:

**v7.15.100** FORMA02 - Practical work from the "Introduction" training: bent pipe under thermo-mechanical and dynamic stress
====

**Summary:**

This test corresponds to the practical work of the basic training in the use of *Code_Aster*. It is an angled pipe, made of a linear elastic material, subjected to various loads: internal pressure, thermal transient, transitory force.

The models used are as follows:


*   modeling A: 3D modeling, thermo-mechanical calculation,


*   B modeling: 3D modeling, dynamic, modal and then transitory calculation,


*   C modeling: shell elements DKT, mechanical calculation under internal pressure loading,


*   D modeling: beam elements (POU_D_T), dynamic calculation.

Chapter 1 "Reference problem" presents the problem to be addressed and the data common to all models; the statements of the Practical Training Work are included in this document:

• TP2: "3D thermo-elastic" see modeling A,

• TP2: "dynamic 3D" see modeling B.

.. toctree::
    :hidden:

    self

.. toctree::
    :maxdepth: 2
    :numbered:

    Probl_me_de_r_f_rence
    Solution_de_r_f_rence
    Mod_lisation_A
    Mod_lisation_B
    Mod_lisation_C
    Mod_lisation_D