Modeling A ============== Characteristics of modeling ----------------------------------- The modeling tested includes 8 elements DIS_TRsur of the SEG2 meshes. The stiffness characteristics of the discrete elements, which are used for the prediction of the nonlinear algorithm, are therefore of the type: K_ TR_D_L. Characteristics of the mesh ---------------------------- Number of knots: 16, number of stitches SEG2: 8, elements DIS_TR: 8. Refer to § :ref:`1.2.1 `. Boundary conditions and loads ------------------------------------- Refer to § :ref:`1.4 `. Discretization in time ----------------------- The analysis time step and time interval are: :math:`\mathrm{\Delta }t=\mathrm{1,0}{10}^{-2}\phantom{\rule{2em}{0ex}}s` and :math:`t\in [:ref:`0s,24s <0s,24s>`] ` Tested sizes and results ------------------------------ The quantities tested are the rotations, and the moments. The values are as shown in § :ref:`2.2 `. Tolerances are by default.