Modeling A
==============


Characteristic of modeling
----------------------------------

The modeling is 3D.


Characteristics of the mesh
----------------------------

The mesh consists of a linear hexahedral mesh (with 8 knots).


.. image:: images/100002000000014F00000124311627FA1AC7AED9.png
    :width: 2.3626in
    :height: 2.0547in


.. _RefImage_100002000000014F00000124311627FA1AC7AED9.png:

 Figure 2: Modeling mesh :math:`A`


Tested sizes and results
------------------------------

VMIS_ISOT_LINE behavior with GDEF_LOG


.. csv-table::

    "Imposed displacement", "Size tested", "Reference :math:`(\mathrm{MPa})` ", "Tolerance (%)"
    ":math:`500\mathrm{mm}` "," SIEQ_ELGA ", "1125", "0.2"
    ":math:`700\mathrm{mm}` "," SIEQ_ELGA ", "1411", "0.2"
    ":math:`900\mathrm{mm}` "," SIEQ_ELGA ", "1664", "0.2"
    ":math:`1100\mathrm{mm}` "," SIEQ_ELGA ", "1891.7", "0.2"