B modeling
==============

Characteristics of modeling
-----------------------------------

Modeling B is in every way the same as A except for the temperature taken to be constant equal to :math:`25°C`


Characteristics of the mesh
----------------------------

The mesh consists of two nodes connected by an element SEG2 with an axis :math:`\mathit{Ox}`.


Tested sizes and results
------------------------------

We choose :math:`{U}_{1}={2.10}^{-4}\mathrm{mm}` and :math:`{U}_{2}={8.10}^{-4}\mathrm{mm}`.

After digital application, the reference solutions are:

:math:`{F}_{1}={2.10}^{4}N`

:math:`{F}_{2}=\mathrm{6,5}{.10}^{4}N`


.. csv-table::

    "**Nodes**", ":math:`U` ", "**Reference**"
    ":math:`\mathrm{N1}` "," :math:`{2.10}^{-4}\mathrm{mm}` "," :math:`-{2.10}^{4}N`"
    ":math:`\mathrm{N2}` "," :math:`{2.10}^{-4}\mathrm{mm}` "," :math:`{2.10}^{4}N`"
    "", "", ""
    ":math:`\mathrm{N1}` "," :math:`{8.10}^{-4}\mathrm{mm}` "," :math:`-\mathrm{6,5}{.10}^{4}N`"
    ":math:`\mathrm{N2}` "," :math:`{8.10}^{-4}\mathrm{mm}` "," :math:`\mathrm{6,5}{.10}^{4}N`"