C modeling
==============

Characteristics of modeling
-----------------------------------

The modeling tested is DIS_T on a SEG2 mesh. The stiffness characteristic of the discrete is of the K_T_D_L type.


Characteristics of the mesh
----------------------------

Number of knots: 2, number of stitches: 1, Elements SEG2: 1.


Boundary conditions and loads
-------------------------------------

The on-the-go condition is set to :math:`{U}_{0}=0.1m`.


Discretization in time
-----------------------

The analysis time step and time interval are:

:math:`\Delta t=\mathrm{4,0}{10}^{-3}s` and :math:`t\in [0s\mathrm{,1}s]`


Tested sizes and results
------------------------------

The quantities tested are the effort and the dissipation for a loading duration of :math:`1\mathit{sec}`. The equations and are evaluated in the test case. Tolerances are by default.


.. csv-table::

    "**Instant**", "**Force**", "**Dissipation**"
    "0.080", "1.582279190E+00", "1.686873697E-01"
    "0.120", "1.392001789E+00", "1.717556743E-01"
    "0.200", "1.220373612E+00", "1.736354073E-01"
    "0.280", "1.140716683E+00", "1.742217215E-01"
    "0.400", "1.078322512E+00", "1.745542834E-01"
    "0.600", "1.028128094E+00", "1.747410406E-01"
    "0.680", "1.016097791E+00", "1.747751013E-01"
    "1.000", "9.868740067E-01", "1.748406080E-01"



.. image:: images/10000201000005420000024F44DECAF2EE57830D.png
    :width: 6.3374in
    :height: 2.7819in


.. _RefImage_10000201000005420000024F44DECAF2EE57830D.png:

**Figure** 5.5-a **: Theoretical creep curves calculated by** **Code_Aster.**