F modeling
==============

Behavioral law and material parameters
-------------------------------------------

The law of behavior tested 'VISC_IRRA_LOG', is documented in doc R5.03.09. This is a law of axial creep under irradiation of fuel assemblies. Values of the parameters used:


.. csv-table::

    "Settings", ":math:`T=0°C` "," :math:`T=500°C`"
    ":math:`E(T)` "," :math:`195000\mathit{MPa}` "," :math:`195000\mathit{MPa}`"
    ":math:`\nu (T)` "," :math:`0.` "," :math:`0.`"
    ":math:`\alpha (T)` "," :math:`1.E-5{K}^{-1}` "," :math:`2.E\mathrm{-}5{K}^{\mathrm{-}1}`"
    ":math:`A` "," :math:`1.28E-1` "," :math:`1.28E-1`"
    ":math:`B` "," :math:`0.01159` "," :math:`0.01159`"
    ":math:`{\mathit{CSTE}}_{\mathit{TPS}}` "," :math:`0.3540` "," :math:`0.3540`"
    ":math:`{\mathit{ENER}}_{\mathit{ACT}}` "," :math:`5000.` "," :math:`5000.`"


The irradiation values as a function of the times are as follows:


.. csv-table::

    "INST "," IRRA"
    ":math:`0` "," :math:`0`"
    ":math:`1` "," :math:`2`"



Results
---------


.. csv-table::

    "Result at order number :math:`i` ", "Name of the tested parameter", "Name of the tested parameter", "Reference type", "tolerance"
    "RESU_19 "," VMIS (MPa)", "AUTRE_ASTER ", "167.4176463232"," 0.10%"
    "RESU_19 "," TRACE (MPa)", "AUTRE_ASTER "," -167.417646323", "0.10%"
    "RESU_19 ", "V1"," AUTRE_ASTER ", "0.009141447967"," 0.10%"
    "RESU_19 ", "V2"," AUTRE_ASTER ", "2.0"," 0.10%"