C modeling
==============

Behavioral law and material parameters
--------------------------------------------

The law of behavior tested 'LEMA_SEUIL', is documented in doc R5.03.08. It is a viscoplastic law with a threshold under irradiation for fuel assemblies. Values of the parameters used:


.. csv-table::

    "Settings", ":math:`T=0°C` "," :math:`T=500°C`"
    ":math:`E(T)` "," :math:`1.E5\mathit{MPa}` "," :math:`0.8E5\mathit{MPa}`"
    ":math:`\nu (T)` "," :math:`0.` "," :math:`0.`"
    ":math:`\alpha (T)` "," :math:`1.0E-4{K}^{-1}` "," :math:`2.0E-4{K}^{-1}`"
    ":math:`A(T)` "," :math:`1.0E-10` "," :math:`0.5E-10`"
    ":math:`S(T)` "," :math:`40.` "," :math:`20.`"



Results
---------


.. csv-table::

    "Result at order number :math:`i` ", "Name of the tested parameter", "Name of the tested parameter", "Reference type", "tolerance"
    "RESU_19 "," VMIS (MPa)", "AUTRE_ASTER ", "499.998221"," 0.10%"
    "RESU_19 "," TRACE (MPa)", "AUTRE_ASTER "," -499.998221", "0.10%"
    "RESU_19 ", "V1"," AUTRE_ASTER ", "3.557036E-8"," 0.10%"
    "RESU_19 ", "V2"," AUTRE_ASTER ", "10.421848"," 0.10%"