v6.05.110 SSNS110 — Extraction of a reinforcing sheet represented by a membrane

Summary:

The objective of this test is to validate the modeling of the decohesion of a reinforcing sheet. This is represented by a membrane, connected to the surrounding volume by an interface law. This modeling is compared to a reference model in which the steel bars are modelled in 3D.

• 1. Reference problem
  • 1.1. Geometry
  • 1.2. Material properties
  • 1.3. Boundary conditions and loads
• 2. Reference solution
  • 2.1. Calculation method
  • 2.2. Reference quantities and results
  • 2.3. Bibliographical references
• 3. Modeling A
  • 3.1. Characteristics of modeling
  • 3.2. Characteristics of the mesh
  • 3.3. Tested sizes and results
• 4. B modeling
  • 4.1. Characteristics of modeling
  • 4.2. Characteristics of the mesh
  • 4.3. Tested sizes and results
• 5. Summary of results