J modeling
==============


Characteristics of modeling
-----------------------------------

It is the same modeling as the F modeling.


Characteristics of the mesh
----------------------------

The mesh, identical to that of modeling E, is represented in FIG. 7.2-a. The mesh is less refined than that of the F modeling, so that some elements see the two horizontal cracks.


Tested sizes and results
------------------------------

The quantities tested are identical to those presented for the F modeling.


+------------------+-------------------+-------------+-----------+---+
|**Identification**                    |**Reference**|% tolerance|7.0|
+------------------+-------------------+-------------+-----------+   +
|DEPZON_1          |DX- :math:`{u}_{x}`|MIN          |0          |   |
+                  +                   +-------------+-----------+---+
|                  |                   |MAX          |0          |7.0|
+                  +-------------------+-------------+-----------+---+
|                  |DY- :math:`{u}_{y}`|MIN          |0          |7.0|
+                  +                   +-------------+-----------+---+
|                  |                   |MAX          |0          |7.0|
+------------------+-------------------+-------------+-----------+---+
|DEPZON_2          |DX- :math:`{u}_{x}`|MIN          |0          |7.0|
+                  +                   +-------------+-----------+---+
|                  |                   |MAX          |0          |7.0|
+                  +-------------------+-------------+-----------+---+
|                  |DY- :math:`{u}_{y}`|MIN          |0          |7.0|
+                  +                   +-------------+-----------+---+
|                  |                   |MAX          |0          |7.0|
+------------------+-------------------+-------------+-----------+---+
|DEPZON_3          |DX- :math:`{u}_{x}`|MIN          |0          |7.0|
+                  +                   +-------------+-----------+---+
|                  |                   |MAX          |0          |7.0|
+                  +-------------------+-------------+-----------+---+
|                  |DY- :math:`{u}_{y}`|MIN          |0          |7.0|
+                  +                   +-------------+-----------+---+
|                  |                   |MAX          |0          |7.0|
+------------------+-------------------+-------------+-----------+---+
|DEPZON_4          |DX- :math:`{u}_{x}`|MIN          |0          |7.0|
+                  +                   +-------------+-----------+---+
|                  |                   |MAX          |0          |7.0|
+                  +-------------------+-------------+-----------+---+
|                  |DY- :math:`{u}_{y}`|MIN          |0          |7.0|
+                  +                   +-------------+-----------+---+
|                  |                   |MAX          |0          |7.0|
+------------------+-------------------+-------------+-----------+---+

Table 12.3-1

The deformation is represented in FIG. 12.4-a.


.. image:: images/1000000000000312000002823639FF88A4F6C287.jpg
    :width: 3.9366in
    :height: 3.2083in


.. _RefImage_1000000000000312000002823639FF88A4F6C287.jpg:

Figure 12.4-a: Deformed structure (Exaggeration 10).


notes
---------

The remarks are identical to those specified for the F model.