Modeling I
==============


Characteristics of modeling
-----------------------------------

It is the same modeling as G modeling, but in 3D.


Characteristics of the mesh
----------------------------

The mesh is the same as in C modeling.


Tested sizes and results
------------------------------

The quantities tested are identical to those described in modeling A.


.. csv-table::

    "**Identification**", "**Reference**"
    "SOMM_ABSpour DX- :math:`\text{Depl\_X}` (master side)", "0"
    "SOMM_ABSpour DY- :math:`\text{Depl\_Y}` (master side)", "0"
    "SOMM_ABSpour DX- :math:`\text{Depl\_X}` (slave side)", "0"
    "SOMM_ABS for DY- :math:`\text{Depl\_Y}` (slave side)", "0"


Table 8.3-1

We test the value of :math:`{E}^{e}` produced by the POST_ERREUR operator.


.. csv-table::

    "**Identification**", "**Reference type**", "**Reference value**", "**Tolerance**"
    "Ee", "'ANALYTIQUE'", "2, 2107"," 0.1%"


We test the value of :math:`{\parallel u\parallel }_{{L}^{2}}` produced by the POST_ERREUR operator.


.. csv-table::

    "**Identification**", "**Reference type**", "**Reference value**", "**Tolerance**"
    "L2 standard, "'ANALYTIQUE'", "0.765941686205"," 0.1%"