Reference solution
=====================


Calculation method used for the reference solution
--------------------------------------------------------

The objective of this test case is to analyze the feasibility of the calculation in axisymmetry and in :math:`\mathrm{3D}`.


Benchmark results
----------------------

No reference values are available. The reference values that will be used to test future versions of *Code_Aster* are those obtained during the first run with modeling A and that will be considered acceptable. The reference values analyzed are the movements of the front face of the piece.


.. csv-table::

    "**Lopin (location)**", "**Travel (** :math:`\mathrm{mm}` **)**", "**Comments**"
    ":math:`K` ", "5.000", "Lopin in the vicinity of point :math:`B` of the sector"
    ":math:`K` ", "20.825", "Lopin in the vicinity of point :math:`C` of the chain"
    ":math:`K` ", "55.880", "Lopin in the vicinity of point :math:`D` of the chain"
    ":math:`K` ", "78.690", "Lopin in the vicinity of point :math:`E` of the sector"
    ":math:`K` ", "144.895", "Lopin in the vicinity of point :math:`F` of the sector"
    ":math:`K` ", "155.096", "Lopin at point :math:`G` of the sector"


For the calculation with contact verification without calculation (option RESOLUTION =' NON '), we test the displacement of the front face of the piece and the interpenetration of the surfaces.


.. csv-table::

    "**Lopin (location)**", "**Travel (** :math:`\mathrm{mm}` **)**", "**Comments**"
    ":math:`K` ", "155.096", "Lopin at point :math:`G` of the sector"



.. csv-table::

    "**Lopin (location)**", "**Interpenetration (** :math:`\mathrm{mm}` **)**", "**Moment**"
    ":math:`L` ", "-5.0", "100.0"
    ":math:`L` ", "-2.0", "155.0"



Uncertainty about the solution
----------------------------

Less than 0.1%


Bibliographical references
---------------------------

None