G modeling results
==============================


Tested values
---------------


.. csv-table::

    "**Identification**", "**Reference**", "Type", "Tolerance"
    "**Loading 1**", "", ""
    "Normal contact force", "2.0784E+05N", "ANALYTIQUE "," RELATIF — 5.00%"
    "Tangential contact force", "-1.2000E+05 N", "ANALYTIQUE "," RELATIF — 5.00%"
    "DX (point A)", "1,000 mm", "NON_REGRESSION "," RELATIF — 1.00%"
    "DY (point A)", "—1,732 mm", "NON_REGRESSION "," RELATIF — 1.00%"
    "DX (point B)", "1,000 mm", "NON_REGRESSION "," RELATIF — 1.00%"
    "DY (point B)", "—1,732 mm", "NON_REGRESSION "," RELATIF — 1.00%"
    "DX (point C)", "1,000 mm", "NON_REGRESSION "," RELATIF — 1.00%"
    "DY (point C)", "—1,732 mm", "NON_REGRESSION "," RELATIF — 1.00%"
    "DX (point D)", "1,000 mm", "NON_REGRESSION "," RELATIF — 1.00%"
    "DY (point D)", "—1,732 mm", "NON_REGRESSION "," RELATIF — 1.00%"
    "**Loading 2**", "", ""
    "Normal contact force", "1, 722E+05N", "ANALYTIQUE "," RELATIF — 5.00%"
    "Tangential contact force", "—1.8173E+05N", "ANALYTIQUE "," RELATIF — 5.00%"
    "DX (dot A)", "1,000 mm", "NON_REGRESSION "," RELATIF — 2, 30%"
    "DY (point A)", "—1,732 mm", "NON_REGRESSION "," RELATIF — 1.00%"
    "DX (point B)", "1,000 mm", "NON_REGRESSION "," RELATIF — 1.00%"
    "DY (point B)", "—1,732 mm", "NON_REGRESSION "," RELATIF — 1.00%"
    "DX (point C)", "1,000 mm", "NON_REGRESSION "," RELATIF — 1.00%"
    "DY (point C)", "—1,732 mm", "NON_REGRESSION "," RELATIF — 1.00%"
    "DX (point D)", "1,000 mm", "NON_REGRESSION "," RELATIF — 1.00%"
    "DY (point D)", "—1,732 mm", "NON_REGRESSION "," RELATIF — 1.00%"
    "**Loading 3**", "", ""
    "Normal contact force", "1, 71486E+05N", "ANALYTIQUE "," RELATIF — 5.00%"
    "Tangential contact force", "—1, 82977E+05N", "ANALYTIQUE "," RELATIF — 5.00%"
    "DX (point A)", "8.794mm", "NON_REGRESSION "," RELATIF — 1.00%"
    "DY (point A)", "2.768mm", "NON_REGRESSION "," RELATIF — 1.00%"
    "DX (point B)", "8.794mm", "NON_REGRESSION "," RELATIF — 1.00%"
    "DY (point B)", "2.768mm", "NON_REGRESSION "," RELATIF — 1.00%"
    "DX (point C)", "8.794mm", "NON_REGRESSION "," RELATIF — 1.00%"
    "DY (point C)", "2.768mm", "NON_REGRESSION "," RELATIF — 1.00%"
    "DX (point D)", "8.794mm", "NON_REGRESSION "," RELATIF — 1.00%"
    "DY (point D)", "2.768 mm", "NON_REGRESSION "," RELATIF — 1.00%"



note
--------

In this case, the game is defined geometrically. The results are less good than those obtained with the penalty for friction alone. In addition, this method is more time consuming.