C modeling
==============

Characteristics of modeling
-----------------------------------

We use a COQUE_SOLIDE model. We are in traction, von Mises plasticity with linear isotropic work hardening, small deformations (VMIS_ISOT_LINE/PETIT).


Characteristics of the mesh
----------------------------

The mesh is as follows:


* Number of knots: 294


* Number of meshes and types: 120 HEXA9


Results
---------

The results are compared to ssnv302c (3D overkill calculation), reference AUTRE_ASTER:


.. csv-table::

    "Location", "NOM_CHAM "," NOM_CMP "," PRECISION"
    "Node I", "DEPL ", "DX", "0.51%"
    "Node C", "SIEQ_NOEU "," VMIS ", "0, 10%"
    "", "SIEF_NOEU "," SIXX "," 0.13%"
    "E node", "SIEQ_NOEU "," VMIS "," ", "0.0023%"
    "", "SIEF_NOEU "," SIXX "," 0.02%"
    "G node", "SIEQ_NOEU "," VMIS "," ", "0, 00052%"
    "", "SIEF_NOEU "," SIXX "," 0.0053%"