Modeling A
==============


Characteristics of modeling
-----------------------------------

It is a 3D model.


Characteristics of the mesh
----------------------------

It is a material point: there is no mesh


Quantities tested and results of modeling A
----------------------------------------

The deformation, the plastic deformation (V2 - V7) and the cumulative plastic deformation (V1) at the end of the loading are tested.


.. csv-table::

    "**Identification**", "**Reference**", "**Type**", "**Tolerance**"
    "EPXX ", "-0.026,829"," ANALYTIQUE "," RELATIF :math:`{10}^{-8}`"
    "EPYY ", "0.013 414"," ANALYTIQUE "," RELATIF :math:`{10}^{-8}`"
    "EPZZ ", "0.013 414"," ANALYTIQUE "," RELATIF :math:`{10}^{-8}`"
    "EPXY ", "-0.002 528"," ANALYTIQUE "," RELATIF :math:`{10}^{-8}`"
    "EPXZ ", "-0.001 264"," ANALYTIQUE "," RELATIF :math:`{10}^{-8}`"
    "EPYZ ", "-0.001 264"," ANALYTIQUE "," RELATIF :math:`{10}^{-8}`"
    "V1", "0.115 766"," ANALYTIQUE "," RELATIF :math:`{10}^{-8}`"
    "V2", "-0.026,829"," ANALYTIQUE "," RELATIF :math:`{10}^{-8}`"
    "V3", "0.013 414"," ANALYTIQUE "," RELATIF :math:`{10}^{-8}`"
    "V4", "0.013 414"," ANALYTIQUE "," RELATIF :math:`{10}^{-8}`"
    "V5", "-0.002 528"," ANALYTIQUE "," RELATIF :math:`{10}^{-8}`"
    "V6", "-0.001 264"," ANALYTIQUE "," RELATIF :math:`{10}^{-8}`"
    "V7", "-0.001 264"," ANALYTIQUE "," RELATIF :math:`{10}^{-8}`"