F modeling
==============


Characteristic of modeling
----------------------------------

The problem is modelled in 3D. The model used is ENDO_PORO_BETON.


Characteristics of the mesh
---------------------------

1 HEXA27 mesh


Tested sizes and results
------------------------------

     All quantities are calculated at node :math:`\text{N}\text{7}`.


.. csv-table::

    "**Identification**", "**Order Number**", "**Reference**"
    ":math:`\text{S}\text{I}\text{X}\text{X}(\text{N}\text{6})` ", "25", "non-regression"
    ":math:`\text{S}\text{I}\text{X}\text{X}(\text{N}\text{6})` ", "50", "non-regression"
    ":math:`\text{S}\text{I}\text{X}\text{X}(\text{N}\text{6})` ", "150", "non-regression"