5. C modeling

5.1. Characteristic of modeling

The problem is modelled in 3D. The model used is FLUA_ENDO_PORO.

5.2. Characteristics of the mesh

1 HEXA8 mesh

5.3. Tested sizes and results

All quantities are calculated at node \(\text{N}\text{7}\).

Identification	Instants	Reference
\(\text{D}\text{Z}(\text{N}\text{7})\)	1	non-regression
\(\text{D}\text{Z}(\text{N}\text{7})\)	50	non-regression
\(\text{D}\text{Z}(\text{N}\text{7})\)	200	non-regression
\(\text{D}\text{Z}(\text{N}\text{7}))\)	350	non-regression

Note: this modeling tests the consideration of the parameter ITER_INTE_MAXI of COMPORTEMENT. The calculation is therefore performed twice, the first with the value by default which leaves it to the code to calculate the maximum number of creep iterations, the second with the value 2, which limits the number of creep iterations to 2 (while 4 is reached in the first calculation).