Modeling A
==============

Characteristics of modeling
-----------------------------------

The modeling used in the test case is as follows: **Element** **'3D' (HEXA8)**


.. image:: images/10000000000000BC000000BEAC47153FF6FB5862.png
    :width: 1.9472in
    :height: 1.972in


.. _RefImage_10000000000000BC000000BEAC47153FF6FB5862.png:

**Figure** 3.1-a **: Geometry and mesh of the modeling used.**


Characteristics of the mesh
----------------------------

Number of knots: 8

Number of meshes and types: 1 HEXA8, 2 QUA4.


Material characteristics
-------------------------

The characteristics of the material are those indicated above and :math:`{\varphi }_{0}=45.0\text{dpa}`.


Tested sizes and results
------------------------------

.. csv-table::

    "**Identification**", "**Field**", "**Size**", "**Reference**", "**Tolerance**"
    "t=20s M1 Point 1"," SIEF_ELGA "," SIYY "," ", "-2.22679599E+02", "1.00E -04%"
    "t=100s M1 Point 1"," SIEF_ELGA "," SIYY "," ", "-2.02670376E+02", "1.00E -04%"
    "t=200s M1 Point 1"," SIEF_ELGA "," SIYY "," ", "-4.44447078E+02", "1.00E -04%"
    "t=100s M1 Point 1"," VARI_ELGA "," ", "V1", "1.12479090E-02", "1.00E -04%"
    "t=110s M1 Point 1"," VARI_ELGA "," ", "V2", "1.45524631E+03", "1.00E -04%"
    "t=200s M1 Point 1"," VARI_ELGA "," ", "V2", "4.26686655E+04", "1.00E -04%"
    "t=200s M1 Point 1"," VARI_ELGA "," ", "V4", "6.33333333E-02", "1.00E -04%"
    "t=110s M1 Point 1"," VARI_ELGA "," ", "V3", "1.36573893E-03", "1.00E -04%"
    "t=200s M1 Point 1"," VARI_ELGA "," ", "V3", "1.25005997E-01", "1.00E -04%"