Modeling A
==============


Characteristic of modeling
----------------------------------

Hardware point modeling, in large deformations. ALGO_INTE =' NEWTON '.


Tested sizes and results
------------------------------


.. csv-table::

    "**Identification**", "**Moments (** :math:`h` **)**", "**Reference**", "**Aster**", "**Tolerance**"
    ":math:`\mathit{EPYY}` ", "2000", "non-regression", "0.020895", "Not applicable"
    ":math:`\mathit{EPYY}` ", "4000", "non-regression", "0.050575", "Not applicable"
    ":math:`\mathit{V11}(\mathit{endo})` ", "2000", "non-regression", "0.032175", "Not applicable"
    ":math:`\mathit{V11}(\mathit{endo})` ", "4000", "non-regression", "0.067927", "Not applicable"


.. csv-table::

    ":math:`\mathit{dEPYY}\mathrm{/}\mathit{dt}` ", "1520", "non-regression", "6,64091E-6", "Not applicable"


The creep curve obtained (:math:`\epsilon =f(t)`) with this model is as follows:


.. image:: images/1000000000000A7B000005E00E4A4556E6287542.png
    :width: 5.9291in
    :height: 3.7165in


.. _RefImage_1000000000000A7B000005E00E4A4556E6287542.png: