v6.04.207 SSNV207 — Cyclic shear test including micro discharges

Summary

A stress-controlled cyclic shear test is carried out. for three behavior models: Hujeux (modeling A), Iwan (modeling B) and CSSM (modeling C). During the charge-discharge cycles, micro-discharges are carried out. The calculated solutions are compared to results from Code_Aster for an identical cyclic loading path without micro-discharges.

• 1. Reference problem
  • 1.1. Geometry
  • 1.2. Material properties
  • 1.3. Boundary conditions and loads
  • 1.4. Initial conditions
• 2. Modeling A
  • 2.1. Characteristics of modeling
  • 2.2. Characteristics of the mesh
  • 2.3. Tested sizes and results
• 3. B modeling
  • 3.1. Characteristics of modeling
  • 3.2. Tested sizes and results
• 4. C modeling
  • 4.1. Characteristics of modeling
  • 4.2. Tested sizes and results
• 5. Summary of results