v6.04.200 SSNV200 - Tensile shear test with model VISC_TAHERI

Summary:

The problem is quasistatic nonlinear in structural mechanics.

The response of a volume element to a loading under tension-shear is analyzed, carried out in such a way that this imposes a uniform stress-deformation state in the element. There is only one solid 3D modeling.

This test is inspired by SSNV102, which tests the elasto-plasticity behavior of TAHERI. Here, viscosity is taken into account.

• 1. Reference problem
  • 1.1. Geometry
  • 1.2. Material properties
  • 1.3. Boundary conditions and loads
  • 1.4. Initial conditions
• 2. Benchmark solution
  • 2.1. Calculation method used for the reference solution
  • 2.2. Benchmark results
  • 2.3. Bibliographical references
• 3. Modeling A
  • 3.1. Characteristics of modeling
  • 3.2. Characteristics of the mesh
  • 3.3. Tested sizes and results
  • 3.4. notes
• 4. Summary of results