C modeling
==============

The only difference compared to B modeling is the fact that we choose a C_ PLAN model and no longer D_ PLAN.


Tested sizes and results
------------------------------

For each lateral face of the structure (:math:`x=0` and :math:`x=\mathrm{LX}`), we test the movements of the nodes located just above and just below the level set.


Compression loading (pressure loading)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~


.. csv-table::

    "**Identification**", "**Reference**"
    ":math:`\mathrm{DX}` for all nodes on the left surface located just below the interface", "10-6"
    ":math:`\mathrm{DX}` for all nodes on the left surface located just above the interface", "10-6"
    ":math:`\mathrm{DX}` for all nodes on the right surface located just below the interface", "-10-6"
    ":math:`\mathrm{DX}` for all nodes on the right surface located just above the interface", "-10-6"



Compression loading/traction (pressure loading)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~


.. csv-table::

    "**Identification**", "**Reference**"
    ":math:`\mathrm{DX}` for all nodes on the left surface located just below the interface", "-10-6"
    ":math:`\mathrm{DX}` for all nodes on the left surface located just above the interface", "10-6"
    ":math:`\mathrm{DX}` for all nodes on the right surface located just below the interface", "10-6"
    ":math:`\mathrm{DX}` for all nodes on the right surface located just above the interface", "-10-6"



Compression loading (surface force loading)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~


.. csv-table::

    "**Identification**", "**Reference**"
    ":math:`\mathrm{DX}` for all nodes on the left surface located just below the interface", "10-6"
    ":math:`\mathrm{DX}` for all nodes on the left surface located just above the interface", "10-6"
    ":math:`\mathrm{DX}` for all nodes on the right surface located just below the interface", "-10-6"
    ":math:`\mathrm{DX}` for all nodes on the right surface located just above the interface", "-10-6"



Compression/tensile loading (surface force loading)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~


.. csv-table::

    "**Identification**", "**Reference**"
    ":math:`\mathrm{DX}` for all nodes on the left surface located just below the interface", "-10-6"
    ":math:`\mathrm{DX}` for all nodes on the left surface located just above the interface", "10-6"
    ":math:`\mathrm{DX}` for all nodes on the right surface located just below the interface", "10-6"
    ":math:`\mathrm{DX}` for all nodes on the right surface located just above the interface", "-10-6"


To test all the nodes at once, we test the minimum and the maximum of the column.