v6.04.181 SSNV181 - Verification that shear has been properly taken into account in the BETON_UMLV and BETON_BURGER models

Summary:

This test makes it possible to validate that shear has been properly taken into account in behavior laws BETON_UMLV and BETON_BURGER. The results of this test are compared with an analytical solution.

• Modeling A: Long-term shear test with model BETON_UMLV.

• Modeling B: Long-term shear test with model BETON_BURGER.

• 1. Reference problem
  • 1.1. Geometry
  • 1.2. Material properties
  • 1.3. Boundary conditions and loads
  • 1.4. Initial conditions
• 2. Benchmark solution
  • 2.1. Calculation method
  • 2.2. Reference quantities and results
  • 2.3. Uncertainties about the solution
  • 2.4. Bibliographical references
• 3. Modeling A
  • 3.1. Characteristics of modeling
  • 3.2. Characteristics of the mesh
  • 3.3. Tested sizes and results
• 4. B modeling
  • 4.1. Characteristics of modeling
  • 4.2. Characteristics of the mesh
  • 4.3. Tested sizes and results
• 5. Summary of results