v6.04.179 SSNV179 - Cube under creep via the LEMA_SEUIL law

Summary:

The purpose of this test is to validate the LEMA_SEUIL law derived from the classical LEMAITRE law. In particular, we will focus on activating the threshold specific to this law. A creep test is therefore carried out on a simple geometry, in this case a cube.

A 3D model with HEXA8 elements is currently available.

• 1. Reference problem
  • 1.1. Geometry
  • 1.2. Material properties
  • 1.3. Boundary conditions and loads
• 2. Benchmark solution
  • 2.1. Calculation method used for the reference solution
  • 2.2. Benchmark results
  • 2.3. Bibliographical references
• 3. Modeling A
  • 3.1. Characteristics of modeling
  • 3.2. Characteristics of the mesh
  • 3.3. Tested sizes and results
• 4. Summary of results