B modeling
==============


Characteristics of modeling
-----------------------------------

3D modeling

Item MECA_TETRA4.


Characteristics of the mesh
----------------------------

Number of knots: 4

Number of meshes and types: 1 TETRA4


Tested features
-----------------------

The ENDO_ORTH_BETON law of behavior in simple compression (without load control).


Charging path
--------------------

The element is subjected to uniaxial traction in the :math:`X` direction. Move :math:`\mathrm{DX}` is imposed on node :math:`\mathrm{N1}`.


Tested values
---------------


.. csv-table::

    "**Instant**", "**Field Name**", "**Component**", "**Location**", "**Aster**"
    "50"," DEPL "," :math:`\mathrm{DX}` "," "," :math:`\mathrm{N1}` ", "-3.E-03"
    "50"," EPSI_ELGA "," :math:`\mathrm{EPXX}` "," "," VOLUME, point 1", "-3.E-03"
    "50"," SIEF_ELGA "," :math:`\mathrm{SIXX}` "," "," VOLUME, point 1", "-2.74465E+01"
    "50"," VARI_ELGA "," :math:`\mathrm{V2}({D}_{\mathrm{yy}})` "," "," VOLUME, point 1", "1.30416E-01"
    "50"," VARI_ELGA "," :math:`\mathrm{V7}(d)` "," "," VOLUME, point 1", "4.80080E-01"