Modeling A
==============


Characteristics of modeling
------------------------

3D modeling

Item MECA_TETRA4.


Characteristics of the mesh
----------------------------

Number of knots: 4

Number of meshes and types: 1 TETRA4


Tested features
-----------------------

The ENDO_ORTH_BETON law of behavior in simple traction (without piloting).


Charging path
--------------------

The element is subjected to uniaxial traction in the :math:`X` direction. Move :math:`\mathrm{DX}` is imposed on node :math:`\mathit{N1}`.


Tested values
---------------


.. csv-table::

    "**Instant**", "**Field Name**", "**Component**", "**Location**", "**Aster**"
    "50"," DEPL "," :math:`\mathrm{DX}` "," "," :math:`\mathrm{N1}` ", "3.E-04"
    "50"," EPSI_ELGA "," :math:`\mathrm{EPXX}` "," "," VOLUME, point 1", "3.E-04"
    "50"," SIEF_ELGA "," :math:`\mathit{SIXX}` "," "," VOLUME, point 1", "1.11388E+00"
    "50"," VARI_ELGA "," :math:`\mathit{V1}({D}_{\mathit{xx}})` "," "," VOLUME, point 1", "6.59365E-01"
    "50"," VARI_ELGA "," :math:`\mathrm{V7}(d)` "," "," VOLUME, point 1", "2.42260E-04"