3. Modeling A#
3.1. Characteristics of modeling#
3D modeling
3.2. Characteristics of the mesh#
Number of knots: |
8 |
Number of meshes: |
1 type HEXA 8 |
6 of type QUAD 4 |
The following meshes are defined:
\(\text{S\_ARR}\) |
|
\(\text{S\_AVT}\) |
|
\(\text{S\_DRT}\) |
|
\(\text{S\_GCH}\) |
|
\(\text{S\_INF}\) |
|
\(\text{S\_SUP}\) |
|
The travel limit conditions imposed are:
On nodes \(\mathrm{NO1}\), \(\mathrm{NO2}\), \(\mathrm{NO3}\), and \(\mathrm{NO4}\): \(\mathrm{DZ}=0\)
On nodes \(\mathrm{NO3}\), \(\mathrm{NO7}\), \(\mathrm{NO8}\), and \(\mathrm{NO4}\): \(\mathrm{DY}=0\)
On nodes \(\mathrm{NO2}\), \(\mathrm{NO6}\), \(\mathrm{NO7}\), and \(\mathrm{NO8}\): \(\mathrm{DX}=0\)
The load consists of the same drying field and the same nodal force, \(1/4\) applied to the four nodes of \(\text{S\_SUP}\).
3.3. Tested sizes and results#
The deformations obtained at node \(\mathrm{N6}\) of mesh \(\mathrm{M1}\) are tested.
Identification |
Reference type |
Reference value |
Tolerance |
\({\varepsilon }_{\mathrm{zz}}\) at node \(\mathrm{NO6}\) at time 0.0 |
“ANALYTIQUE” |
0.0 |
|
\({\varepsilon }_{\mathrm{zz}}\) at node \(\mathrm{NO6}\) at time 64800 |
“ANALYTIQUE” |
-4.07E-04 |
|
\({\varepsilon }_{\mathrm{zz}}\) at node \(\mathrm{NO6}\) at time 648000 |
“ANALYTIQUE” |
-5.16E-04 |
|
\({\varepsilon }_{\mathrm{zz}}\) at node \(\mathrm{NO6}\) at time 6480000 |
“ANALYTIQUE” |
-8.13E-04 |
|
\({\varepsilon }_{\mathrm{zz}}\) at node \(\mathrm{NO6}\) at time 64800000 |
“ANALYTIQUE” |
-1.37E-03 |
|