D modeling
==============


Characteristics of modeling
------------------------

The modeling is 3D.


Characteristics of the mesh
----------------------------

Number of knots: 8

Number of meshes and types: 1 HEXA8


Tested sizes and results
------------------------------

At the last time step (NUME_ORDRE 202), the stress SIZZ, as well as 2 internal variables V7 and V22 corresponding respectively to the reversible deviatoric deformation following :math:`\mathrm{zz}` and the damage value, are tested. These quantities are observed at the first Gauss point (all fields being uniform). We also test the displacement value at node :math:`\mathrm{N5}`.


.. csv-table::

    "**Field**", "**Component**", "**Point**", "**Reference Value**", "**Reference Type**", "**Tolerance**"
    "SIEF_ELGA "," SIXX ", "Gauss point 1", "1.38880E +00"," NON_REGRESSION "," 0.01%"
    "DEPL ", "DX", ":math:`\mathrm{N5}` ", "6.635E-5"," NON_REGRESSION "," 0.01%"
    "VARI_ELGA ", "V22", "Gauss Point 1", "5.607E-2"," NON_REGRESSION "," 0.01%"
    "VARI_ELGA ", "V7", "Gauss Point 1", "1.0145E-5"," NON_REGRESSION "," 0.01%"