B modeling
==============


Characteristics of modeling
------------------------

The modeling is axisymmetric (AXIS).


Characteristics of the mesh
----------------------------

Number of knots: 4

Number of meshes and types: 1 QUAD4


Tested sizes and results
------------------------------

At the last time step (NUME_ORDRE 104), the stress SIYY, the natural creep deformation EPYY and 2 internal variables V5 and V22 corresponding respectively to the reversible deviatoric deformation following :math:`\mathrm{yy}` and the damage value are tested. These quantities are observed at the first Gauss point (all fields being uniform).


.. csv-table::

    "**Field**", "**Component**", "**Point**", "**Reference Value**", "**Reference Type**", "**Tolerance**"
    "SIEF_ELGA "," SIZZ ", "Gauss point 1", "1.80000E+00"," NON_REGRESSION "," 0.01%"
    "VARI_ELGA ", "V5", "Gauss Point 1", "3.10881E-05"," NON_REGRESSION "," 0.01%"
    "VARI_ELGA ", "V22", "Gauss Point 1", "1.54698E-05"," NON_REGRESSION "," 0.01%"
    "EPSP_ELGA "," EPYY ", "Gauss point 1", "5.57153E-05"," NON_REGRESSION "," 0.01%"


We find the same results as in 3 dimensions.