Modeling A
==============


Characteristics of modeling
-----------------------------------

The modeling is 3D.


Characteristics of the mesh
----------------------------

Number of knots: 8

Number of meshes and types: 1 HEXA8


Tested sizes and results
------------------------------

At the last time step (NUME_ORDRE 104), the stress SIZZ, the natural creep deformation EPZZ and 2 internal variables V7 and V22 corresponding respectively to the reversible deviatoric deformation following :math:`\mathrm{zz}` and the damage value are tested. These quantities are observed at the first Gauss point (all fields being uniform).


.. csv-table::

    "**Field**", "**Component**", "**Point**", "**Reference Value**", "**Reference Type**"
    "SIEF_ELGA "," SIZZ ", "Gauss point 1", "1.80000E+00"," NON_REGRESSION"
    "VARI_ELGA ", "V5", "Gauss Point 1", "3.10881E-05"," NON_REGRESSION"
    "VARI_ELGA ", "V22", "Gauss Point 1", "1.54698E-05"," NON_REGRESSION"
    "EPSP_ELGA "," EPYY ", "Gauss point 1", "5.57153E-05"," NON_REGRESSION"


The weight of the Gauss point 1 is also tested.


.. csv-table::

    "**Field**", "**Component**", "**Point**", "**Reference Value**", "**Reference Type**", "**Tolerance**"
    "COOR_ELGA ", "W", "Gauss point 1", "0.25"," ANALYTIQUE ", "1x -7%"