D modeling
==============


Characteristics of modeling
------------------------

The modeling is 3D.

Contact method: contact formulation CONTINUE.


Characteristics of the mesh
----------------------------

Number of knots: 8

Number of meshes and types: 2 HEXA8


Tested sizes and results
------------------------------


.. csv-table::

    "**Identification**", "**Reference type**", "**Reference value**", "**Tolerance**"
    "DEPL, :math:`\mathit{DZ}` at point :math:`\mathit{NH1}` ", "'ANALYTIQUE'", "-0.1", "1.0E-6%"
    "DEPL, :math:`\mathit{DZ}` at point :math:`\mathit{NH2}` ", "'ANALYTIQUE'", "-0.1", "1.0E-6%"
    "DEPL, :math:`\mathit{DZ}` at point :math:`\mathit{NH3}` ", "'ANALYTIQUE'", "-0.1", "1.0E-6%"
    "DEPL, :math:`\mathit{DZ}` at point :math:`\mathit{NH4}` ", "'ANALYTIQUE'", "-0.1", "1.0E-6%"
    "DEPL, :math:`\mathit{DZ}` at point :math:`\mathit{NB5}` ", "'ANALYTIQUE'", "-0.1", "1.0E-6%"
    "DEPL, :math:`\mathit{DZ}` at point :math:`\mathit{NB6}` ", "'ANALYTIQUE'", "-0.1", "1.0E-6%"
    "DEPL, :math:`\mathit{DZ}` at point :math:`\mathit{NB7}` ", "'ANALYTIQUE'", "-0.1", "1.0E-6%"
    "DEPL, :math:`\mathit{DZ}` at point :math:`\mathit{NB8}` ", "'ANALYTIQUE'", "-0.1", "1.0E-6%"
    "REAC_NODA, :math:`\mathit{DZ}` at point :math:`\mathit{NH1}` ", "'ANALYTIQUE'", "10000", "1.0E-6%"
    "REAC_NODA, :math:`\mathit{DZ}` at point :math:`\mathit{NH2}` ", "'ANALYTIQUE'", "10000", "1.0E-6%"
    "REAC_NODA, :math:`\mathit{DZ}` at point :math:`\mathit{NH3}` ", "'ANALYTIQUE'", "10000", "1.0E-6%"
    "REAC_NODA, :math:`\mathit{DZ}` at point :math:`\mathit{NH4}` ", "'ANALYTIQUE'", "10000", "1.0E-6%"
    "REAC_NODA, :math:`\mathit{DZ}` at point :math:`\mathit{NB5}` ", "'ANALYTIQUE'", "-10000", "1.0E-6%"
    "REAC_NODA, :math:`\mathit{DZ}` at point :math:`\mathit{NB6}` ", "'ANALYTIQUE'", "-10000", "1.0E-6%"
    "REAC_NODA, :math:`\mathit{DZ}` at point :math:`\mathit{NB7}` ", "'ANALYTIQUE'", "-10000", "1.0E-6%"
    "REAC_NODA, :math:`\mathit{DZ}` at point :math:`\mathit{NB8}` ", "'ANALYTIQUE'", "-10000", "1.0E-6%"



.. csv-table::

    "**Identification**", "**Reference type**", "**Reference value**", "**Tolerance**"
    "DEPL, :math:`\mathit{LAGS}\text{\_}C` at point :math:`\mathit{NH1}` ", "'ANALYTIQUE'", "- 10000", "1.0E-6%"
    "DEPL, :math:`\mathit{LAGS}\text{\_}C` at point :math:`\mathit{NH2}` ", "'ANALYTIQUE'", "- 10000", "1.0E-6%"
    "DEPL, :math:`\mathit{LAGS}\text{\_}C` at point :math:`\mathit{NH3}` ", "'ANALYTIQUE'", "- 10000", "1.0E-6%"
    "DEPL, :math:`\mathit{LAGS}\text{\_}C` at point :math:`\mathit{NH4}` ", "'ANALYTIQUE'", "- 10000", "1.0E-6%"



notes
---------

The results obtained are perfect. The screening is going well. It is necessary to reinforce RESI_GEOM in the generalized Newton method to have good tolerances, or to switch to partial Newton or fixed point.