.. _V6.04.160:

**v6.04.160** SSNV160 - Hydrostatic test with behavior models CAM_CLAY, MCC and CSSM
==================================================================================================

**Summary:**

This hydrostatic compression test validates elastoplastic laws CAM_CLAY [:ref:`r7.01.14 <R7.01.14>`], MCC [:ref:`r7.01.48 <R7.01.48>`] and
CSSM [:ref:`r7.01.44 <R7.01.49>`], specific to soil behaviors, presenting under this load a non-linear elastic regime and a hardening plastic regime.

The load is controlled by the average stress and generates elastic and plastic deformations that are only volume. 
The C and D models use the CAM_CLAY model. G modeling uses model MCC. The F modeling uses model CSSM.
For each of the two models, the calculated quantities are compared to a reference solution.


.. toctree::
    :hidden:

    self

.. toctree::
    :maxdepth: 2
    :numbered:

    Probleme_de_reference
    Solution_de_reference
    Modelisation_C
    Modelisation_D
    Modelisation_G
    Modelisation_F
    Synthese_des_resultats
    References